LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Door Mirror Remote Control Switch >> Changeover Switch >> Component Function Check

Component Function Check

  1. DATA MONITOR

    G-20 CONSULT

    1. Select "Data Monitor" mode of "AUTO DRIVE POS.".
    2. Select "MIR CHNG SW-R", "MIR CHNG SW-L".
    3. Check that the function operates normally according to the following conditions:
      Monitor item Condition Status
      MIR CHNG SW-R Mirror switch (right) Operate ON
      Release OFF
      MIR CHNG SW-L Mirror switch (left) Operate ON
      Release OFF

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals