LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. STEP 1

    Turn ignition switch ON and wait at least 3 seconds.

    GO TO STEP 2  .

  2. STEP 2

    G-20 CONSULT

    Check "Self Diagnostic Result" mode of "AUTO DRIVE POS.".

    Is the DTC detected?

    YES 

    Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

    NO-1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals