Diagnosis Procedure
- CHECK COMBINATION SWITCH
Check combination switch. Refer to SYMPTOM TABLE (with Intelligent Key system) or SYMPTOM TABLE (without Intelligent Key system).
Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Repair or replace the malfunctioning part.
- CHECK FRONT FOG LAMP REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
- Select "FRONT FOG LAMP REQ" in "Data Monitor" of "IPDM E/R".
- With operating the front fog lamp switch, check the monitor status.
Monitor item Condition Monitor status FRONT FOG LAMP REQ Front fog lamp switch
(With lighting switch 2ND)ON On OFF Off Is the item status normal?
YES
Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .
NO
Replace BCM. Refer to REMOVAL AND INSTALLATION (with Intelligent Key system) or REMOVAL AND INSTALLATION (without Intelligent Key system).