DTC Inspection Priority Chart
If multiple DTCs are detected simultaneously, check them one by one depending on the following DTC inspection priority chart.
| Priority |
Detected items (DTC) |
| 1 |
- C1A0A: CONFIG UNFINISHED
- U1000: CAN COMM CIRCUIT
- U1010: CONTROL UNIT (CAN)
|
| 2 |
- C1A01: POWER SUPPLY CIR
- C1A02: POWER SUPPLY CIR 2
- C1A04: ABS/TCS/VDC CIRC
- C1A05: BRAKE SW/STOP L SW
- C1A06: OPERATION SW CIRC
- C1A07: CVT
- C1A13: STOP LAMP RLY FIX
- C1A14: ECM CIRCUIT
- C1A24: NP RANGE
- C1A25: SHIFT RANGE IND
- C1A26: ECD MODE MALF
- C1A33: CAN TRANSMISSION ERR
- C1A34: COMMAND ERROR
- C1A39: STRG SEN CIR
- C1A40: SYSTEM SW CIR
- C1B00: CAMERA UNIT MALF
- C1B01: CAM AIMING INCMP
- C1B03: CAM ABNRMAL TMP DETCT
- C1B53: SIDE RDR R MALF
- C1B54: SIDE RDR L MALF
- C1B59: CCM
- C1B82: DIST SEN OFF-CENTER
- C1B83: DIST SEN BLOCKED
- C1B84: DIST SEN MALFUNCTION
- C1B85: DIST SEN ABNORMAL TEMP
- C1B86: DIST SEN PWR SUP CIR
- C1B5D: FEB OPE COUNT LIMIT
- C1B5A: G SENSOR MALF
|
- U0121: VDC CAN CIR 2
- U0126: STRG SEN CAN CIR 1
- U0235: ICC SENSOR CAN CIRC 1
- U0155: MET CAN CIRC 1
- U0401: ECM CAN CIR 1
- U0402: TCM CAN CIR 1
- U0415: VDC CAN CIR 1
- U0428: STRG SEN CAN CIR 2
- U1500: CAM CAN CIR 2
- U1501: CAM CAN CIR 1
- U1502: ICC SEN CAN COMM CIR
- U1503: SIDE RDR L CAN CIR 2
- U1504: SIDE RDR L CAN CIR 1
- U1505: SIDE RDR R CAN CIR 2
- U1506: SIDE RDR R CAN CIR 1
- U1507: LOST COMM (SIDE RDR R)
- U1508: LOST COMM (SIDE RDR L)
- U150B: ECM CAN CIRC 3
- U150C: VDC CAN CIRC 3
- U150D: TCM CAN CIRC 3
- U150E: BCM CAN CIRC 3
- U1513: METER CAN CIRC 3
- U1514: STRG SEN CAN CIRC 3
- U1515: ICC SENSOR CAN CIRC 3
- U1516: CAM CAN CIR 3
- U1518: SIDE RDR L CAN CIRC 3
- U1519: SIDE RDR R CAN CIRC 3
|
| 3 |
- C1A03: VHCL SPEED SE CIRC
|
| 4 |
|