Work Procedure

WITH CONSULT

Perform "READ CONFIGURATION" to save or print current vehicle specification.

Is vehicle specification saved normally?

YES 

GO TO STEP 2  .

NO 

GO TO STEP 4  .

Replace lane camera unit. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 3  .

WITH CONSULT

Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.

GO TO STEP 6  .

Replace lane camera unit. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 5  .

WITH CONSULT

1. Select "WRITE CONFIGURATION - Manual selection"
2. Touch "Next".
3. Touch "OK".
4. Check that the configuration has been successfully written and touch "End".

GO TO STEP 6  .

Confirm that LDW/LDP systems operate normally. Refer to DESCRIPTION .

Work End.