Work Procedure

Perform the camera aiming adjustment. Refer to WORK PROCEDURE (CAMERA AIMING ADJUSTMENT) .

GO TO STEP 2. 

Perform the self - diagnosis of lane camera unit with CONSULT. Check if any DTC is detected.

Is any DTC detected?

YES 

Perform the trouble diagnosis for the detected DTC. Refer to DTC INDEX

NO 

GO TO STEP 3. 

1. Perform the LDW/LDP system action test. Refer to DESCRIPTION .
2. Check that the LDW/LDP system operates normally.

GO TO STEP 4. 

1. Perform the Blind Spot Warning system action test. Refer to DESCRIPTION .
2. Check that the Blind Spot Warning system operates normally.

Work End.