LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Rogue S, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (With Intelligent Key System) (Circuit Diagnosis, Symptom Diagnosis & Removal And Installation) >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK COMBINATION METER INPUT SIGNAL

    Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.

    BUZZER  
    Under the condition of buzzer input : On
    Except above : Off

    Is the inspection result normal?

    YES 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace BCM. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals