Diagnosis Procedure
- CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
- Disconnect front combination lamp connector and IPDM E/R connector.
- Check continuity between IPDM E/R harness connector and ground.
IPDM E/R Ground Continuity Connector Terminal E217 49 No Is the inspection result normal?
YES
GO TO 2.
NO
Repair or replace harness.
- CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
- Reconnect IPDM E/R connector.
- Check continuity between fog lamp harness connector and ground.
Front combination lamp Ground Continuity Connector Terminal LH E236 10 No Is the inspection result normal?
YES
Refer to INTERMITTENT INCIDENT .
NO
Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .