Diagnosis Procedure
- CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
- Disconnect front combination lamp connector and IPDM E/R connector.
- Check continuity between IPDM E/R harness connector and ground.
IPDM E/R Ground Continuity Connector Terminal E218 58 No Is the inspection result normal?
YES
GO TO 2.
NO
Repair or replace harness.
- CHECK FRONT COMBINATION LAMP SHORT CIRCUIT TO GROUND
- Reconnect IPDM E/R connector.
- Check continuity between front combination lamp harness connector and ground.
Front combination lamp Ground Continuity Connector Terminal RH E234 10 No Is the inspection result normal?
YES
Refer to INTERMITTENT INCIDENT .
NO
Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .