Meter System: Fail-Safe
The combination meter activates the fail-safe control if the CAN communication lines between each unit are malfunctioning.
| Function | Specifications | ||
|---|---|---|---|
| Speedometer | Reset to zero by suspending communication. | ||
| Tachometer | |||
| Engine coolant temperature gauge | |||
| Meter illumination control | When suspending communication, changes to nighttime mode. | ||
| Buzzer | Turns OFF by suspending communication. | ||
| Information display | Current fuel consumption | The last result calculated during normal condition is indicated. | |
| Average fuel consumption | |||
| Average vehicle speed | |||
| Range (Distance to empty) | |||
| Driving distance | |||
| Door open warning | The display turns OFF by suspending communication. | ||
| Lift gate open warning | |||
| Low tire pressure warning | |||
| Parking brake release warning | |||
| Fuel filler cap warning | |||
| Oil pressure warning | |||
| CVT warning | |||
| BSW warning | |||
| Odo/trip meter | An indicated value is maintained at communications blackout. | ||
| Shift position indicator | The indicator turns OFF by suspending communication. | ||
| Warning lamp/indicator lamp | ABS warning lamp | Turns ON by suspending communication. | |
| Brake warning lamp | |||
| EPS warning lamp | |||
| VDC warning lamp | |||
| AWD warning lamp | |||
| Malfunction indicator lamp | |||
| Airbag warning lamp | |||
| Charge warning lamp | |||
| VDC OFF indicator lamp | Turns OFF by suspending communication. | ||
| SPORT mode indicator lamp | |||
| AWD LOCK indicator lamp | |||
| High beam indicator lamp | |||
| Turn signal indicator lamp | |||
| Position lamp indicator lamp | |||
| OD OFF indicator lamp | |||
| BSW indicator lamp | |||
| ECO mode indicator lamp | |||
| Front fog lamp indicator lamp | |||
| Hill descent control indicator lamp | |||
| Low tire pressure warning lamp | After blinking for 1 minute, the lamp remains ON. | ||