LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> System Description >> Diagnosis System (Combination Meter) >> Description >> Starting Combination Meter Self-Diagnosis Mode >> How To Initiate Self-Diagnosis Mode

How To Initiate Self-Diagnosis Mode

  1. Turn ignition switch OFF.
  2. While pressing the trip reset switch (1), turn ignition switch ON.
    Fig 1: Locating Trip Reset Switch
    G09157748Courtesy of NISSAN NORTH AMERICA, INC.
  3. Keep the trip reset switch for 1 seconds or more.
  4. Press the trip reset switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)
  5. "Work instruction code" is indicated in the top portion of information display and self - diagnosis is started.
  6. The mode switches in the order shown below each time the trip reset switch is pressed.
NOTE:

If the trip reset switch is not operated for 20 seconds or more, the self - diagnosis mode is automatically cancelled.

Test order Test item Description
1 Work instruction code This item is displayed, but not used.
2 Part number
3 Software code
4 EEPROM code
5 Hardware code
6 P.C.B code
7 Circuit check The pointer of the following items moves from 0 to MAX twice.
  • Speedometer
  • Tachometer
  • Engine coolant temperature gauge
  • Fuel gauge
NOTE:

If any one of the pointers does not sweep, replace combination meter.
8 Color check* 1 Performs the color check of the information display.
9 error code* 2 Displays the error code of the following items:
  • Speedometer
  • Tachometer
  • Engine coolant temperature gauge
  • Fuel gauge
  • Meter control switch
10 Warning/indicator lamp check All warning/indicator lamp illuminate.
NOTE:
  • When either one of them does not turn ON, replace combination meter.
  • SRS air bag warning lamp and security indicator lamp are not illuminate.
NOTE:

When the trip reset switch is pressed during the indication of Test order "10," test item returns to Test order "2."

* 1: Color Check

Fig 2: View Of Color Check Test Screen
GNSJSNIA5944ZZ-944Courtesy of NISSAN NORTH AMERICA, INC.
MARU-A-W Blue MARU-B-W Red MARU-C-W Pink
MARU-D-W Green MARU-E-W Light blue MARU-F-W Yellow
MARU-G-W White MARU-H-W White MARU-I-W Black
MARU-J-W Light blue MARU-K-W Black MARU-L-W Pink
MARU-M-W Black MARU-N-W Blue MARU-O-W Black
MARU-P-W Dark blue MARU-Q-W White MARU-R-W Blue

* 2: Error Code

Fig 3: View Of Error Code Screen
GNSJSNIA5945ZZ-945MARU-A-WMARU-B-WMARU-C-WMARU-D-WMARU-E-WMARU-F-WMARU-G-WMARU-H-WCourtesy of NISSAN NORTH AMERICA, INC.
Item Code Description Action to take/Reference
MARU-A-W Speedometer 0 Normal -
1 A vehicle speed signal cannot be received from ABS actuator and electric unit (control unit). Perform "Self Diagnostic Result" of "ABS."
Refer to DTC INDEX .
2 A vehicle speed signal received from the ABS actuator and electric unit (control unit) is abnormal.
MARU-B-W Tachometer 0 Normal -
1 An engine speed signal cannot be received from ECM. Perform "Self Diagnostic Result" of "ECM."
Refer to DTC INDEX .
MARU-C-W Fuel gauge 0 Normal -
1 Fuel gauge circuit is short. Refer to COMPONENT FUNCTION CHECK .
2 Fuel gauge circuit is open.
MARU-D-W Engine coolant temperature gauge 0 Normal -
1 An engine coolant temperature signal cannot be received from ECM. Perform "Self Diagnostic Result" of "ECM."
Refer to DTC INDEX .
MARU-E-W Meter control switch 0 Normal -
1 When judging that the illumination control switch signal circuit is shorted for 5 minutes or more. Refer to DIAGNOSIS PROCEDURE .
2 When judging that the trip reset switch signal circuit is shorted for 5 minutes or more.
3 When judging that the both switch signal circuit is shored for 5 minutes or more.
MARU-F-W - 0 Displays "0" constantly. -
MARU-G-W - 0 Displays "0" constantly. -
MARU-H-W - 0 Displays "0" constantly. -
scientia non olet · About LEMON Manuals