Physical Values
| Terminal No. (Wire color) |
Description | Condition | Value (Approx.) |
||||
|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/ Output |
||||
| 1 (B) |
Ground | Ground | - | - | - | 0 V | |
| 7 (BG) |
Ground | Security signal | Input | Ignition switch OFF | Security indicator ON. | 0 V | |
| Security indicator OFF. | Battery voltage | ||||||
| 9 (GR) |
Ground | ECO mode switch | - | - | - | - | |
| 10 (P) |
Ground | O/D OFF switch | - | - | - | - | |
| 15 (L) |
Ground | Ambient sensor signal | Input | Ignition switch ON | - | ||
| 17 (BG) |
Ground | Meter control switch ground | - | - | - | 0 V | |
| 18 (SB) |
Ground | Trip/reset signal | Input | Ignition switch OFF or ON | Trip/Reset switch is pressed. | 0 V | |
| Other than the above. | 5.0 V | ||||||
| 20 (Y) |
Ground | Ambient sensor ground | - | - | - | 0 V | |
| 21 (L) |
Ground | Steering switch ground | - | - | - | 0 V | |
| 22 (Y) |
Ground | Steering switch output 1 | - | - | - | - | |
| 23 (GR) |
Ground | Steering switch output 2 | - | - | - | - | |
| 24 (BR) |
Ground | Washer fluid level switch signal | Input | Ignition switch ON | Washer fluid level switch ON. | 0 V | |
| Washer fluid level switch OFF. | Battery voltage | ||||||
| 25 (V) |
Ground | Brake fluid level switch signal | Input | Ignition switch ON | Brake fluid level low. | 0 V | |
| Brake fluid level normal. | Battery voltage | ||||||
| 26 (G) |
Ground | Parking brake switch signal | Input | Ignition switch ON | Parking brake applied. | 0 V | |
| Parking brake released. | Battery voltage | ||||||
| 28 (Y) |
Ground | Seat belt buckle switch signal LH | Input | Ignition switch ON | When driver seat belt is fastened. | Battery voltage | |
| When driver seat belt is unfastened. | 0 V | ||||||
| 29 (R) |
Ground | Sport mode switch signal | - | - | - | - | |
| 36 (GR) |
Ground | Illumination control switch signal (+) | Input | Ignition switch OFF or ON | When illumination control switch (+) is pressed. | 0 V | |
| Other than the above. | 5.0 V | ||||||
| 37 (V) |
Ground | Illumination control switch signal (-) | Input | Ignition switch OFF or ON | When illumination control switch (-) is pressed. | 0 V | |
| Other than the above. | 5.0 V | ||||||
| 38 (G) |
Ground | Vehicle speed signal (8-pulse) |
Output | Ignition switch ON | Speedometer operated [When vehicle speed is approx. 25 MPH (40 km/h)]. |
NOTE:
The maximum voltage varies depending on the specification (destination unit). |
|
| 39 (W) |
Ground | Vehicle speed signal (2 - pulse) |
Output | Ignition switch ON | Speedometer operated [When vehicle speed is approx. 25 MPH (40 km/h)]. |
NOTE:
The maximum voltage varies depending on the specification (destination unit). |
|
| 41 (L) |
Ground | CAN high | - | - | - | - | |
| 42 (P) |
Ground | CAN low | - | - | - | - | |
| 43 (W) |
Ground | Illumination control signal | Output | Ignition switch ON |
|
||
|
|||||||
|
0 V | ||||||
| 44 (LA/B) |
Ground | Fuel level sensor ground | - | Ignition switch ON | - | 0 V | |
| 45 (LA/G) |
Ground | Battery power supply | - | - | - | Battery voltage | |
| 46 (LA/BR) |
Ground | Ignition signal | - | Ignition switch ON or START | - | Battery voltage | |
| 47 (SB) |
Ground | M CAN high | - | - | - | - | |
| 48 (LG) |
Ground | M CAN low | - | - | - | - | |
| 51 (LA/L) |
Ground | Fuel level sensor signal | - | Ignition switch ON | Fuel gauge indication position. | Battery voltage | |
| 52 (B) |
Ground | Ground | - | - | - | 0 V | |