LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis) >> Circuit Diagnosis >> Steering Switch >> Component Inspection

Component Inspection

  1. CHECK STEERING SWITCH RESISTANCE

    Check resistance between the following steering switch terminals:

    Steering switches Condition Resistance (Ω)
    (Approx.)
    Terminal Signal name
    18 19 Display Depress DISP switch. 2023
    Back Depress BACK_R switch. 723
    25 Enter Depress ENTER switch. 2023
    Menu Up Depress UTRI switch. 121
    Menu Down Depress DTRI switch. 321

    Is the inspection result normal?

    YES 

    GO TO 2.

    NO 

    Replace steering wheel switch. Refer to REMOVAL AND INSTALLATION .

  2. CHECK SPIRAL CABLE

    Check continuity between the following spiral cable terminals:

    Spiral cable Continuity
    Terminals
    18 15 Yes
    25 8
    19 14

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace spiral cable. Refer to REMOVAL AND INSTALLATION .