LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting System (Halogen Headlamp) (DTC/Circuit Diagnosis) >> Circuit Diagnosis >> Optical Sensor >> Component Function Check

Component Function Check

  1. CHECK OPTICAL SENSOR SIGNAL BY CONSULT

    G-20 CONSULT DATA MONITOR

    1. Turn ignition switch ON.
    2. Select "OPTICAL SENSOR" in "Data Monitor" of "BCM (HEADLAMP)".
    3. Turn lighting switch AUTO.
    4. With the optical sensor illuminating, check the monitor status.
    Monitor item Condition Voltage (Approx.)
    OPTICAL SENSOR Optical sensor When illuminating 3.1 V or more *
    When shutting off light 0.6 V or less

    * : Illuminates the optical sensor. The value may be less than the standard value if brightness is weak.

    Is the inspection result normal?

    YES 

    Optical sensor is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals