Torque Converter And Converter Housing Oil Seal: Assembly

Note the followings and install in the reverse order of removal.

• Drive converter housing oil seal evenly using a drift (commercial service tool) so that converter housing oil seal protrudes by the dimension (A) respectively.
  Fig 1: Converter Housing Oil Seal Protrudes By Dimension (A)

  Courtesy of NISSAN NORTH AMERICA, INC.

  Dimension (A)

  : 1.3+-0.5 mm (0.051+-0.02 in)

  NOTE:

  Converter housing oil seal pulling direction is used as the reference.

• Attach the pawl (A) of the torque converter to the drive sprocket hole (B) on the transaxle assembly side.
  Fig 2: Identifying Drive Sprocket Hole And Pawl

  Courtesy of NISSAN NORTH AMERICA, INC.
  CAUTION:

  • Rotate the torque converter for installing torque converter.
  • Never damage the bushing inside the torque converter sleeve when installing the converter housing oil seal.