Diagnosis Procedure

With CONSULT

1. Start the engine.
2. Select "Data Monitor" in "TRANSMISSION".
3. Select "RANGE".
4. Shift selector lever.
5. Check that selector lever position, "RANGE" on CONSULT screen, and shift position indicator display on combination meter are identical.

Is the check result normal?

YES 

INSPECTION END

NO-1 ("RANGE" is changed but is not displayed on shift position indicator. 

Check "Self Diagnostic Result" in "TRANSMISSION".

NO-2 ("RANGE" and shift position indicator are different.) 

Check "Self Diagnostic Result" in "TRANSMISSION".

NO-3 (Specific"RANGE" is not displayed on shift position indicator.) 

Check "Self Diagnostic Result" in "METER/M&A".