Diagnostic Test

With CONSULT

1. Turn ignition switch ON.
2. Check "Self Diagnostic Results" in "TRANSMISSION".

Is any DTC detected?

YES 

Check DTC detected item. Refer to DTC INDEX .

NO 

GO TO STEP 2  .

With CONSULT

Check "Self Diagnostic Results" in "METER/M&A".

Is any DTC detected?

YES 

Check DTC detected item. Refer to DTC INDEX .

NO 

GO TO STEP 3  .

With CONSULT

1. Shift the selector lever to "D" position.
2. Select "Data Monitor" in "METER/M&A".
3. Select "O/D OFF IND".
4. Check that "O/D OFF IND" turns ON/OFF when overdrive control switch is operated. Refer to REFERENCE VALUE .

Is the inspection result normal?

YES 

Replace combination meter. Refer to REMOVAL AND INSTALLATION .

NO 

GO TO STEP 4  .

With CONSULT

1. Select "Data Monitor" in "TRANSMISSION".
2. Select "SPORT MODE SW".
3. Check that "SPORT MODE SW" turns ON/OFF when overdrive control switch is operated. Refer to REFERENCE VALUE .

Is the inspection result normal?

YES 

Replace combination meter. Refer to REMOVAL AND INSTALLATION .

NO 

Check overdrive control switch. Refer to DIAGNOSIS PROCEDURE .