DTC Detection Logic

DTC	Trouble diagnosis name	DTC detection condition	Possible causes
P2765	Input/Turbine Speed Sensor B Circuit	The secondary speed sensor value is less than 150 RPM continuously for 5 seconds or more under the following diagnosis conditions: Diagnosis conditions Primary pulley speed: 1, 000 RPM or more TCM power supply voltage: More than 11 V	Harness or connector (Secondary speed sensor circuit is open or shorted) Secondary speed sensor
		The secondary pulley speed sensor value is 240 RPM or less continuously for 500 msec or more under the following diagnosis conditions: Diagnosis condition 10-msec-ago secondary pulley speed: 1, 000 RPM or more TCM power supply voltage: More than 11 V