DTC Confirmation Procedure
CAUTION:
Be careful of the driving speed.
- PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.
GO TO STEP 2 .
- CHECK DTC DETECTION
With CONSULT
- Start the engine.
- Drive the vehicle for 10 seconds or more.
- Stop the vehicle.CAUTION:
Never stop the engine.
- Repeat step 2 through 3.
- Check the DTC.
Is "P1586" detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
INSPECTION END