| P0965 |
Pressure control solenoid B control circuit range performance |
The detection conditions continuously for 5 seconds or more under the following diagnosis conditions:
- Diagnosis conditions
- Selector lever: Other than "P" and "N" positions
- Auxiliary gearbox shifting is not in progress.
- Engine speed: More than 500 RPM
- Detection condition A
- Actual primary pulley ratio: 2.0 - 2.4
- Target primary pulley ratio: Less than 1.2
- Detection condition B
- Actual primary pulley ratio: 0.35 - 0.75
- Target primary pulley ratio: More than 1.55
|
Primary pressure solenoid valve |