DTC Confirmation Procedure
CAUTION:
- Be sure to perform "DIAGNOSIS PROCEDURE " and then perform "DTC CONFIRMATION PROCEDURE".
- Never perform "DTC CONFIRMATION PROCEDURE" before the repairs. Doing so may result in a secondary malfunction.
- Be careful of the driving speed.
- PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.
GO TO STEP 2 .
- CHECK DTC DETECTION
- Start the engine.
- Drive the vehicle.
- Maintain the following conditions for 20 seconds or more.
Vehicle speed : 20 km/h (13 MPH) or more - Stop the vehicle.
- Check the first trip DTC.
Is "P0965"detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
INSPECTION END