DTC Detection Logic

DTC	Trouble diagnosis name	DTC detection condition	Possible causes
P0715	Input/Turbine Speed Sensor A Circuit	The primary speed sensor value is less than 150 RPM continuously for 5 seconds or more under the following diagnosis conditions: Diagnosis conditions Secondary pulley speed: 1, 000 RPM or more TCM power supply voltage: More than 11 V	Harness or connector (Primary speed sensor circuit is open or shorted) Primary speed sensor
		The primary speed sensor value is 240 RPM or less continuously for 500 msec or more under the following diagnosis conditions: Diagnosis conditions 10-msec-ago primary pulley speed: 1, 000 RPM or more TCM power supply voltage: More than 11 V