Component Description

Unit	Description
Combination meter	Controls the following with the signals received from each unit via CAN communication and the signals from switches and sensors: Speedometer Tachometer Engine coolant temperature gauge Fuel gauge Warning lamps Indicator lamps Meter illumination control Information display
Steering switch	Transmits the meter control switch signal to the combination meter.
Illumination control switch	Transmits the following signals to the combination meter: Illumination control switch signal (+) Illumination control switch signal (-)
ECM	Transmits the following signals to the combination meter via CAN communication: Engine speed signal Engine coolant temperature signal Engine oil pressure warning signal Fuel consumption monitor signal
ABS actuator and electric unit (control unit)	Transmits the vehicle speed signal to the combination meter via CAN communication.
Power steering control module	Transmits the EPS signal to the combination meter via CAN communication.
BCM	Transmits the following signals to the combination meter via CAN communication: Position light request signal Low tire pressure warning lamp signal Door switch signal Trunk lid switch signal
TCM	Receives the O/D OFF switch signal from the combination meter via CAN communication. Transmits the following signals to the combination meter via CAN communication: O/D OFF indicator request signal CVT shift selector position signal
CVT shift selector switch (O/D OFF switch)	Transmits the O/D OFF switch signal to the combination meter
Fuel level sensor unit	Transmits the fuel level sensor signal to the combination meter.
Seat belt buckle switch LH (RH similar)	Transmits the seat belt buckle switch LH signal to the combination meter.
Air bag diagnosis sensor unit	Transmits the following signals to the combination meter: Seat belt buckle switch RH signal Air bag warning indicator
Engine oil pressure sensor	Transmits the engine oil pressure sensor signal to the ECM.
Ambient sensor	Transmits the ambient sensor signal to the combination meter (without auto a/c).
Ambient sensor	Transmits the ambient sensor signal to the A/C auto amp. (with auto a/c).
A/C auto amp.	Receives the ambient sensor signal from the ambient sensor (with auto a/c). Transmits the ambient sensor signal to the combination meter via CAN communication.
Parking brake switch	Transmits the parking brake switch signal to the combination meter.
Washer fluid level switch	Transmits the washer fluid level switch signal to the combination meter.
Brake fluid level switch	Transmits the brake fluid level switch signal to the combination meter.