Removal and Installation: Removal

Remove the center console side finishers (1) (LH/RH).
1. Remove the center console side finisher screw (A) (LH/RH).
2. Release the clips using a suitable tool, then remove the center console side finisher.
  
  Fig 1: Removing Center Console Side Finisher Screw (LH/RH)
  Courtesy of NISSAN NORTH AMERICA, INC.
Remove the shift selector finisher (1).
1. Remove cluster lid C lower. Refer to "REMOVAL AND INSTALLATION - CLUSTER LID C LOWER ".
2. Remove the shift selector screws (A).
3. Release the clips using a suitable tool, then remove the shift selector finisher.
  
  Fig 2: Removing Shift Selector Screws
  Courtesy of NISSAN NORTH AMERICA, INC.
Release the center console cup holder finisher clips, then remove the center console cup holder finisher (1).

Fig 3: Releasing Center Console Cup Holder Finisher Clips
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the center console screw cover (1) using a suitable tool and the center console screws (A) (LH/RH).

Fig 4: Removing Center Console Screw Cover
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the remaining center console screws (A).

Fig 5: Identifying Center Console Screws
Courtesy of NISSAN NORTH AMERICA, INC.
Disconnect the harness connectors from the center console assembly and remove.