Diagnosis Procedure

Check steering switch circuit. Refer to "DIAGNOSIS PROCEDURE ".

Is the inspection result normal? 

YES: GO TO 2.

NO: Repair or replace harness or connector.

Check steering switch resistance. Refer to "COMPONENT INSPECTION ".

Is the inspection result normal? 

YES: GO TO 3.

NO: Replace steering switch. Refer to "REMOVAL AND INSTALLATION ".

Check spiral cable for continuity. Refer to "COMPONENT INSPECTION ".

Is the inspection result normal? 

YES: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

NO: Replace spiral cable. Refer to "REMOVAL AND INSTALLATION ".