LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Rogue S, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (With Intelligent Key) >> DTC/Circuit Diagnosis >> Back Door Switch >> Component Inspection (Without Automatic Back Door)

Component Inspection (Without Automatic Back Door)

  1. CHECK BACK DOOR SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect back door lock assembly connector.
    3. Check continuity between back door lock assembly terminals.
      Back door lock assembly Condition Continuity
      Terminal
      3 4 Door switch Pressed No
      Released Yes

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace back door lock assembly. Refer to "DOOR LOCK: REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals