METER SYSTEM: Fail-safe

The combination meter activates the fail-safe control if the CAN communication lines between each unit are malfunctioning.

Function		Specifications
Speedometer		Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Meter illumination control		When suspending communication, changes to nighttime mode.
Buzzer		Turned off by suspending communication.
Information display	Current fuel consumption	When reception time of an abnormal signal is 2 seconds or less, the last received datum is used for calculation to indicate the result. When reception time of an abnormal signal is more than 2 seconds, the last result calculated during normal condition is indicated.
	Average fuel consumption
	Average vehicle speed
	Range (Distance to empty)
	Driving distance	An indicated value is maintained at communications blackout.
	Door open warning	The display turns OFF by suspending communication.
	Lift gate open warning
	Low tire pressure warning
	Parking brake release warning
	Fuel filler cap warning
	Oil pressure warning
	CVT warning
	BSW/LDW warning
	ODO/trip meter	An indicated value is maintained at communications blackout.
	Shift position indicator	The indicator turns OFF by suspending communication.
Warning lamp/indicator lamp	ABS warning lamp	Turned on by suspending communication.
	Brake warning lamp
	EPS warning lamp
	VDC warning lamp
	AWD warning lamp
	Malfunction indicator lamp
	VDC OFF indicator lamp	Turned off by suspending communication.
	SPORT mode indicator lamp
	AWD LOCK indicator lamp
	High beam indicator lamp
	Turn signal indicator lamp
	Position lamp indicator lamp
	OD OFF indicator lamp
	BSW indicator lamp
	LDW indicator lamp
	Low tire pressure warning lamp	After blinking for 1 minute, the lamp remains ON.