Physical Values
| Terminal No. (Wire color) | Description | Condition | Value (Approx.) | ||||
|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||||
| 1 (B) | Ground | Ground | - | - | - | 0 V | |
| 7 (BG) | Ground | Security signal | Input | Ignition switch OFF | Security indicator ON | 0 V | |
| Security indicator OFF | Battery voltage | ||||||
| 10 (P) | Ground | O/D off switch | - | - | - | - | |
| 15 (L) | Ground | Ambient sensor signal | Input | Ignition switch ON | - | ||
| 17 (BG) | Ground | Meter control switch ground | - | - | - | 0 V | |
| 18 (SB) | Ground | Trip/reset signal | Input | Ignition switch OFF or ON | Trip/Reset switch is pressed | 0 V | |
| Other than the above | 5.0 V | ||||||
| 20 (Y) | Ground | Ambient sensor ground | - | - | - | 0 V | |
| 21 (L) | Ground | Steering switch ground | - | - | - | 0 V | |
| 22 (Y) | Ground | Steering switch output 1 | - | - | - | - | |
| 23 (GR) | Ground | Steering switch output 2 | - | - | - | - | |
| 24 (V) | Ground | Washer fluid level switch signal | Input | Ignition switch ON | Washer fluid level switch ON | 0 V | |
| Washer fluid level switch OFF | Battery voltage | ||||||
| 25 (V) | Ground | Brake fluid level switch signal | Input | Ignition switch ON | Brake fluid level low | 0 V | |
| Brake fluid level normal | Battery voltage | ||||||
| 26 (G) | Ground | Parking brake switch signal | Input | Ignition switch ON | Parking brake applied | 0 V | |
| Parking brake released | Battery voltage | ||||||
| 28 (Y) | Ground | Seat belt buckle switch signal LH | Input | Ignition switch ON | When driver seat belt is fastened. | Battery voltage | |
| When driver seat belt is unfastened. | 0 V | ||||||
| 29 (R) | Ground | Sport mode switch signal | - | - | - | - | |
| 36 (GR) | Ground | Illumination control switch signal (+) | Input | Ignition switch OFF or ON | When illumination control switch (+) is pressed | 0 V | |
| Other than the above | 5.0 V | ||||||
| 37 (V) | Ground | Illumination control switch signal (-) | Input | Ignition switch OFF or ON | When illumination control switch (-) is pressed | 0 V | |
| Other than the above | 5.0 V | ||||||
| 38 (G) | Ground | Vehicle speed signal (8-pulse) | Output | Ignition switch ON | Speedometer operated [When vehicle speed is approx. 25 MPH (40 km/h)] |
NOTE:
The maximum voltage varies depending on the specification (destination unit).
|
|
| 39 (W) | Ground | Vehicle speed signal (2-pulse) | Output | Ignition switch ON | Speedometer operated [When vehicle speed is approx.25 MPH (40 km/h)] |
NOTE:
The maximum voltage varies depending on the specification (destination unit).
|
|
| 41 (L) | Ground | CAN-H | - | - | - | - | |
| 42 (P) | Ground | CAN-L | - | - | - | - | |
| 43 (W) | Ground | Illumination control signal | Output | Ignition switch ON |
|
||
|
|||||||
|
0 V | ||||||
| 44 (LA/B) | Ground | Fuel level sensor ground | - | Ignition switch ON | - | 0 V | |
| 45 (LA/G) | Ground | Battery power supply | - | - | - | Battery voltage | |
| 46 (LA/BR) | Ground | Ignition signal | - | Ignition switch ON or START | - | Battery voltage | |
| 47 (SB) | Ground | M CAN-H | - | - | - | - | |
| 48 (LG) | Ground | M CAN-L | - | - | - | - | |
| 51 (LA/L) | Ground | Fuel level sensor signal | - | Ignition switch ON | Fuel gauge indication position | - | Battery voltage |
| 52 (B) | Ground | Ground | - | - | - | 0 V | |