Component Inspection

REMOVE FUEL LEVEL SENSOR UNIT
Remove the fuel level sensor unit. Refer to "REMOVAL AND INSTALLATION ".

: GO TO 2.

CHECK FUEL LEVEL SENSOR UNIT

Check the resistance between fuel level sensor unit and fuel pump.

Terminals

Condition

Resistance (Ω) (Approx.)

Height [mm (in)]

Fuel level sensor unit

Full⁽¹⁾ (2)

151.0 (5.9)

Empty⁽¹⁾ (1)

278

13.8 (0.5)

⁽¹⁾	When float rod is in contact with stopper.

Fig 1: Identifying Fuel Level Sensor Unit And Pump Float Position (Full And Empty)

Courtesy of NISSAN NORTH AMERICA, INC.

Is inspection result OK?

YES: Inspection End.

NO: Replace fuel level sensor unit and fuel pump. Refer to "REMOVAL AND INSTALLATION ".