LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Sentra SL >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Removal And Installation >> Glove Box Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the instrument side finisher RH using a suitable tool.
  2. Remove the glove box assembly upper screws (A).
    Fig 1: Identifying Glove Box Assembly Upper Screws
    G08990622Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the glove box assembly lower screws (A).
    Fig 2: Identifying Glove Box Assembly Lower Screws
    G08990623Courtesy of NISSAN NORTH AMERICA, INC.
  4. Disconnect the harness connectors from the trunk switch and glove box lamp, then remove the glove box assembly.
scientia non olet · About LEMON Manuals