Component Inspection

CHECK AMBIENT SENSOR

Turn ignition switch ON.
Remove ambient sensor. Refer to "REMOVAL AND INSTALLATION ".

Check resistance between ambient sensor terminals.

Terminal		Condition	Resistance kΩ
Terminal		Temperature °C (°F)	Resistance kΩ
1	2	-15 (5)	12.73
		-10 (14)	9.92
		-5 (23)	7.80
		0 (32)	6.19
		5 (41)	4.95
		10 (50)	3.99
		15 (59)	3.24
		20 (68)	2.65
		25 (77)	2.19
		30 (86)	1.81
		35 (90)	1.51
		40 (104)	1.27
		45 (113)	1.07

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ambient sensor.