Data Monitor
DISPLAY ITEM LIST
| X: Applicable | ||||
|---|---|---|---|---|
| Display item [Unit] | MAIN SIGNALS | Description | ||
| SPEED METER [km/h] |
X | Value of vehicle speed signal received from ABS actuator and electric unit (control unit) via CAN communication.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
||
| SPEED OUTPUT [km/h] |
X | Vehicle speed signal value transmitted to other units via CAN communication.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
||
| ODO OUTPUT [km/h or mph] |
Odometer signal value transmitted to other units via CAN communication. | |||
| TACHO METER [rpm] |
X | Value of the engine speed signal received from ECM via CAN communication.
NOTE:
8191.875 is displayed when the malfunction signal is received.
|
||
| FUEL METER [L] |
X | Fuel level indicated on combination meter. | ||
| W TEMP METER [°C] |
X | Value of engine coolant temperature signal is received from ECM via CAN communication.
NOTE:
215 is displayed when the malfunction signal is input.
|
||
| ABS W/L [On/Off] |
Status of ABS warning lamp detected from ABS warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |||
| VDC/TCS IND [On/Off] |
Status of VDC OFF indicator lamp detected from VDC OFF indicator lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |||
| SLIP IND [On/Off] |
Status of VDC warning lamp detected from VDC warning lamp signal received from ABS actuator and electric unit (control unit) via CAN communication. | |||
| BRAKE W/L [On/Off] |
Status of brake warning lamp detected from brake warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication.
NOTE:
Displays "Off" if the brake warning lamp is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.
|
|||
| DOOR W/L [On/Off] |
Status of door open warning detected from door switch signal received from BCM via CAN communication. | |||
| TRUNK/GLAS-H [Off] |
This item is displayed, but cannot be monitored. | |||
| HI-BEAM IND [On/Off] |
Status of high beam indicator lamp detected from high beam request signal is received from BCM via CAN communication. | |||
| TURN IND [On/Off] |
Status of turn indicator lamp detected from turn indicator signal is received from BCM via CAN communication. | |||
| FR FOG IND [On/Off] |
This item is displayed, but cannot be monitored. | |||
| RR FOG IND [Off] |
This item is displayed, but cannot be monitored. | |||
| LIGHT IND [On/Off] |
Status of position lamp indicator lamp detected from position light request signal is received from BCM via CAN communication. | |||
| OIL W/L [On/Off] |
Status of oil pressure warning lamp detected from oil pressure switch signal is received from BCM via CAN communication. | |||
| MIL [On/Off] |
Status of malfunction indicator (Yellow) detected from malfunctioning indicator signal is received from ECM via CAN communication. | |||
| GLOW IND [Off] |
This item is displayed, but cannot be monitored. | |||
| C-ENG2 W/L [Off] |
This item is displayed, but cannot be monitored. | |||
| CRUISE IND [On/Off] |
Status of CRUISE indicator detected from ASCD status signal is received from ECM via CAN communication. | |||
| SET IND [On/Off] |
Status of SET indicator detected from ASCD status signal is received from ECM via CAN communication. | |||
| O/D OFF IND [On/Off] |
Status of OD OFF indicator lamp detected from OD OFF indicator signal is received from TCM via CAN communication. | |||
| ATC/T-AMT W/L [Off] |
This item is displayed, but cannot be monitored. | |||
| ATF TEMP W/L [Off] |
This item is displayed, but cannot be monitored. | |||
| CVT IND [Off] |
This item is displayed, but cannot be monitored. | |||
| 4WD W/L [On/Off] |
Status of AWD warning lamp judged from AWD warning lamp signal received from AWD control unit with CAN communication line. | |||
| 4WD LOCK IND [On/Off] |
Status of AWD lock indicator lamp judged from mode lamp signal received from AWD control unit with CAN communication line. | |||
| FUEL W/L [On/Off] |
Low fuel warning status detected by the identified fuel level. | |||
| WASHER W/L [On/Off] |
Status of low washer fluid warning judged from washer level switch input to combination meter. | |||
| AIR PRES W/L [On/Off] |
Status of low tire pressure warning judged from TPMS malfunction warning lamp signal received from BCM with CAN communication line. | |||
| KEY G/Y W/L [On/Off] |
Status of Intelligent Key system malfunction detected from KEY/LOCK warning request signal is received from BCM via CAN communication. | |||
| KEY R W/L [Off] |
This item is displayed, but cannot be monitored. | |||
| KEY KNOB W/L [Off] |
This item is displayed, but cannot be monitored. | |||
| EPS W/L [On/Off] |
Status of EPS warning lamp detected from EPS warning lamp signal is received from EPS control unit via CAN communication. | |||
| DDS(1) W/L [Off] |
This item is displayed, but cannot be monitored. | |||
| SPORT MODE IND [On/Off] |
Status of SPORT mode indicator lamp detected from SPORT mode switch signal is received from ECM via CAN communication. | |||
| DPF W/L [Off] |
This item is displayed, but cannot be monitored. | |||
| TRAILER IND [Off] |
This item is displayed, but cannot be monitored. | |||
| SHIFT IND [P, R, N, D, L, M1, M2, M3, M4, M5, M6] |
Status of shift position indicator judged from shift position signal received from TCM with CAN communication line. | |||
| O/D OFF SW [On/Off] |
Status of overdrive control switch. | |||
| M RANGE SW [On/Off] |
Status of manual mode switch. | |||
| NM RANGE SW [On/Off] |
Status of non-manual mode switch. | |||
| AT SFT UP SW [On/Off] |
Status of manual mode shift up switch. | |||
| AT SFT DWN SW [On/Off] |
Status of manual mode shift down switch. | |||
| ST SFT UP SW [On/Off] |
Status of paddle shifter shift up switch. | |||
| ST SFT DWN SW [On/Off] |
Status of paddle shifter shift down switch. | |||
| A/C LOW TEMP [Off] |
This item is displayed, but cannot be monitored. | |||
| COMP F/B SIG [Off] |
This item is displayed, but cannot be monitored. | |||
| PKB SW [On/Off] |
Status of parking brake switch. | |||
| BUCKLE SW [On/Off] |
Status of seat belt buckle switch (driver side). | |||
| BRAKE OIL SW [On/Off] |
Status of brake fluid level switch. | |||
| A/C AMP CONN [On/Off] |
Status of A/C auto amp. connection recognition signal. | |||
| DISTANCE [km] |
Value of distance to empty calculated by combination meter. | |||
| OUTSIDE TEMP [°C or °F] |
Ambient temperature value converted from ambient sensor signal received from ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information display. (Because the information display value is a corrected value from the ambient sensor input value.)
|
|||
| FUEL LOW SIG [On/Off] |
Status of fuel level low warning signal to output to AV control unit via CAN communication. | |||
| SPORT MODE SW [On/Off] |
Status of SPORT mode switch. | |||
| BUZZER [On/Off] |
X | Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter. | ||
| ASCD SPD BLNK [Off] |
This item is displayed, but cannot be monitored. | |||
| ASCD STATUS [Off] |
This item is displayed, but cannot be monitored. | |||
| ASCD REQ SPD [Off] |
This item is displayed, but cannot be monitored. | |||
|
||||
NOTE:
Some items are not available according to vehicle specification.