LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting System (Xenon) >> DTC/Circuit Diagnosis >> Headlamp Aiming Control System (Manual) >> Component Inspection

Component Inspection

  1. CHECK HEADLAMP AIMING SWITCH 
    1. Remove the headlamp aiming switch.
    2. Check the resistance among each headlamp aiming switch terminal.
      Headlamp aiming switch Condition Resistance (Approx.)
      Terminal Switch position
      1 2 0 A: 160 Ω
      1 B: 249 Ω
      2 C: 464 Ω
      3 D: 887 Ω
      3 - E: 412 Ω
      Fig 1: Checking Resistance Between Headlamp Aiming Switch Terminals
      G08995259Courtesy of NISSAN NORTH AMERICA, INC.

      Is the measurement value normal? 

      YES: Headlamp aiming switch is normal.

      NO: Replace the headlamp aiming switch.

scientia non olet · About LEMON Manuals