Wiper Does Not Wipe When Front Washer Operates

CHECK CIRCUIT BETWEEN COMBINATION SWITCH AND BCM
With CONSULT
1. Select "BCM" on CONSULT, and select "WIPER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR". Make sure that "FR WASHER SW" turn ON-OFF according to front wiper switch operation.
Without CONSULT

Refer to , "COMBINATION SWITCH INSPECTION ".

OK or NG

OK: Replace BCM. Refer to , "REMOVAL AND INSTALLATION OF BCM ".

NG: Check combination switch (wiper switch). Refer to , "COMBINATION SWITCH INSPECTION ".