LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical (Qr25DE) >> Service Information >> Oil Seal >> Removal and Installation of Rear Oil Seal >> Removal

Removal and Installation of Rear Oil Seal: Removal

  1. Remove the engine assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove clutch cover and clutch disc (M/T models). Refer to "EXPLODED VIEW " .
  3. Remove flywheel (M/T models) or drive plate (CVT models). Refer to "DISASSEMBLY AND ASSEMBLY ".
  4. Remove rear oil seal using suitable tool.
    CAUTION: Be careful not to scratch rear oil seal retainer.
    Fig 1: Removing Rear Oil Seal
    G04885795Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals