LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Service Information >> Brake Tube And Hose >> Front Brake Tube and Hose >> Removal

Front Brake Tube and Hose: Removal

CAUTION:
  • Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.
  • Cover the open end of brake tubes and hoses when disconnecting to prevent entrance of dirt.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
  1. Remove the tire and wheel assembly. Refer to , "ADJUSTMENT ".
  2. Remove the brake tube from brake hose using suitable tool.
  3. Remove the union bolt and brake hose from caliper assembly.
  4. Remove the lock plate and brake hose from the vehicle.
Fig 1: Locating Union Bolt
G04927300Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals