Drive Belt Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

Belt Tension Release Tool Snap-on YA9317, commercially available

Move the auto-tensioner (A) using the belt tension release tool (YA9317) in the direction of the arrow to relieve tension from the drive belt (B), then remove the drive belt.

Fig 1: Moving Auto-Tensioner Using Belt Tension Release Tool (YA9317) In Direction Of Arrow
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the new belt in the reverse order of removal.