LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Intake Air System) >> IMT Actuator Replacement

IMT Actuator Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 6 under ENGINE REMOVAL ).
  2. Disconnect the IMT actuator 5P connector (A).
    Fig 1: Identifying IMT Actuator 5P Connector, IMT Actuator And Bolts
    G08052614Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (B) and the IMT actuator (C).
  4. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals