Low Fuel Indicator Test
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Do the gauge control module self-diagnostic function (see
SELF-DIAGNOSTIC FUNCTION
).
- If the low fuel indicator flashes, go to step 2.
- If the low fuel indicator does not flash, replace the gauge control module (see GAUGE CONTROL MODULE REPLACEMENT ).
- Check for body electrical system DTCs.
- If any DTCs are indicated, do the indicated DTC'S TROUBLESHOOTING .
- If no DTCs are indicated, go to step 3.
- Do the fuel gauge sending unit test (see FUEL GAUGE SENDING UNIT TEST ).