Hydraulic Control
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
The valve bodies consist of the main valve body, the regulator valve body, the secondary valve body, the stator shaft support, and the manual valve body. They are installed to the torque converter housing. Fluid regulated by the regulator valve passes through the manual valve to the various control valves. All the clutches receive fluid from the shaft internal hydraulic circuit. Also, the hydraulic control body is adapted to the secondary valve body, which includes the main shift hydraulic circuit, the solenoid valve, the hydraulic switch, etc. To shorten the fluid passage and optimize the hydraulic pressure.