LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Automatic Transmission) >> Inspection >> Fluid Leak Check

Fluid Leak Check

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for fluid leaks between the mating faces of the transfer assembly and transmission.
  2. If there is leak, remove the transfer cover, then replace the transfer cover oil seal and the O-ring (see TRANSFER COVER OIL SEAL REPLACEMENT  ).
  3. Check for fluid leaks between the transfer companion flange and the transfer oil seal.
  4. If there is leak, replace the transfer oil seal and the O-ring (see TRANSFER OIL SEAL REPLACEMENT  ). Do not replace the oil seal with the transfer assembly on the transmission.
scientia non olet · About LEMON Manuals