PCM/TCM Reset
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To reset the PCM/TCM, initialize only the automatic transmission memory stored in the PCM or the TCM.
- Select the A/T system with the HDS.
- Reset the PCM/TCM with the HDS while the engine is stopped.
- Turn the ignition switch to LOCK (0).
- Turn the ignition switch to ON (II), and wait for 30 seconds.
- Turn the ignition switch to LOCK (0), and disconnect the HDS from the DLC.