Tool Maintenance
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
Follow these instructions to keep the ATF cooler cleaner working properly:
- Replace the two magnetic non bypass spin-on filters after every 20 hours of use, based on the hour meter, or when you notice a restriction in the ATF flow.
- Check the level and condition of the fluid in the tank before each use.
- Replace the ATF in the tank when it looks dark or dirty.