LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (PGM-FI System) >> MAP Sensor Replacement

MAP Sensor Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 6 under ENGINE REMOVAL ).
  2. Disconnect the MAP sensor 3P connector (A).
    Fig 1: Identifying MAP Sensor 3P Connector And Screw
    G08057169Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screw (B).
  4. Remove the MAP sensor (C).
  5. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals