Towing Hook Installation
The detachable towing hook is for towing very short distances, such as freeing the vehicle. The hook attaches to the anchor in the front or rear bumper.
- To avoid damage to the vehicle, use the towing hook for straight flat ground towing only. Do not tow on an angle.
- Do not use the detachable towing hook as a tie down to secure the vehicle to a flat-bed tow truck. Use the tie down hook slots provided.
- Remove the cover (A) from the bumper.
Front bumper:
Rear bumper:
- Remove the detachable towing hook from the tool kit under the cargo area floor.
- Screw in the detachable towing hook (B), and tighten it securely by hand.
Wheel Lift Equipment - The tow truck uses two pivoting arms that go under the tires (front or rear) and lifts them off the ground. The other two wheels remain on the ground. Never tow the vehicle with wheel lift equipment.
Sling-type Equipment - The tow truck uses metal cables with hooks on the ends. These hooks go around parts of the frame or suspension, and the cables lift that end of the vehicle off the ground. The vehicle's suspension and body can be seriously damaged if this method of towing is attempted. This method of towing the vehicle is unacceptable.
The only recommended way of towing the vehicle is on a flat-bed tow truck.
NOTE:- Towing the vehicle with only two wheels on the ground will damage parts of the SH-AWD system. If the vehicle is damaged, it must be transported on a flat-bed tow truck or trailer.
- Improper towing preparation will damage the transmission. Follow the above procedure exactly.
- Trying to lift or tow the vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle's weight.