LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Audio System) >> Symptom Troubleshooting >> Volume Is Too High Or Too Low When Driving At Freeway Speeds

Volume Is Too High Or Too Low When Driving At Freeway Speeds

WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Check the vehicle battery condition first, (see BATTERY TEST )
  • Check the connectors for poor connections or loose terminals.
  1. Test-drive the vehicle at highway speed, and monitor the volume level.

    Is the volume level too high or too low? 

    YES  - Go to step 2.

    NO  - Intermittent failure, the system is OK at this time.

  2. Change the SVC mode setting in sound set-up to Low, Mid, and High.

    Is the volume level still too high or too low? 

    YES  -

    NO  - Improper SVC setting for the customer's sound preference. Advise the customer to try different SVC settings.