R Position: Driving in reverse gear
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
As the speed of the vehicle reaches the programmed value, the PCM turns shift solenoid valves B and C ON. Shift solenoid valve A remains OFF, and shift solenoid valve D remains ON. Shift solenoid valve B is turned ON, and shift solenoid valve B pressure (SB) is applied to the right end of shift valve B. Shift valve B is moved to the right side to switch the A/T clutch pressure control solenoid valve A pressure port (55') to the line pressure port (1B) leading to the 5th clutch. The 5th clutch is engaged with the line pressure.