Recline Inner Cover

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front seat (see FRONT SEAT REMOVAL/INSTALLATION ).
Remove the front seat cushion cover/pad (see FRONT SEAT CUSHION COVER/PAD REPLACEMENT ).
Remove the recline inner cover (A).
1. Release the hooks (B) of the recline inner cover from the seat cushion frame.
2. Detach the cover from the seat cushion frame tube (C), and remove the cover.
Driver's outer recline inner cover

Fig 1: Identifying Hooks Of Recline Inner Cover From Seat Cushion Frame - Driver's Outer Recline Inner Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Driver's inner recline inner cover

Fig 2: Identifying Hooks Of Recline Inner Cover From Seat Cushion Frame - Driver's Inner Recline Inner Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Passenger's outer recline inner cover

Fig 3: Identifying Hooks Of Recline Inner Cover From Seat Cushion Frame - Passenger's Outer Recline Inner Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Passenger's inner recline inner cover

Fig 4: Identifying Hooks Of Recline Inner Cover From Seat Cushion Frame - Passenger's Inner Recline Inner Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the cover by first fitting the hooks on the seat frame, then attach the cover to the seat cushion frame tube.