Rear Air Outlet Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the body.

Remove the rear bumper (see FRONT AIR SPOILER REPLACEMENT ).
Detach the hooks (A), then remove the rear air outlet (B).

Fig 1: Identifying Rear Air Outlet & Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the air outlet by pushing on the hook portions until the hooks snap into place.