DTC 39-03: EPS Control Unit Internal Circuit (Power Self-holding Circuit)
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0).
- Wait 30 seconds or more.
- Turn the ignition switch to ON (II).
- Check for DTCs with the HDS.
Is DTC 39-03 indicated?
YES - Replace the EPS control unit (see EPS CONTROL UNIT REMOVAL/INSTALLATION ).
NO - Intermittent failure, the system is OK at this time.